Patterns of volatile metabolites and nonvolatile trichothecenes produced by isolates of <Emphasis Type="Italic">Stachybotrys,Fusarium, Trichoderma,Trichothecium</Emphasis> and <Emphasis Type="Italic">Memnoniella</Emphasis>

We reported previously that trichodiene, a volatile trichothecene derivative, was produced by a Stachybotrys isolate, also known to produce highly cytotoxic, non-volatile, macrocyclic trichothecenes (satrotoxins). We investigated the relationship between the production of trichodiene and various non-volatile trichothecenes for several molds. Volatile metabolites were concentrated by adsorption on Tenax TA and analyzed by GC/MS, while non-volatile metabolites were separated by HPLC, derivatized and analyzed by GC/MS. Stachybotrys chartarum isolates producing macrocyclic trichothecenes secreted significantly larger amounts of trichodiene and other sesquiterpenes than isolates which only produced simple trichothecenes. The amounts of secreted trichodiene were relatively small in all cases. With the exception of Memnoniella, which excreted small amounts of sesquiterpenes, the other isolates produced varying amounts of sesquiterpenes, including trichodiene, as well as simple tricothecenes, no detectable trichodiene, but large amounts of griseofulvin derivatives. In Stachybotrys there is apparently a correlation between trichodiene and macrocyclic trichothecene production. In the remaining isolates, there was no simple relationship between trichodiene and non-volatile trichothecene synthesis. Trichodiene is produced in larger amounts by Stachybotrys isolates, which also produce satratoxins, but it will be difficult to utilize this metabolite to detect toxic isolates in buildings due to the relatively small amounts excreted.     

On vertical distribution of tintinnines (Ciliata,Oligotrichida, Tintinnina) in the open waters of the South Adriatic

The vertical distribution of tintinnines was studied in the open sea of the South Adriatic at a station near the city of Dubrovnik (Station 12) in the period from 1979–1980 as well as at 11 stations during a cruise in January 1980. Samples were taken with the 53-m Nansen type net equipped with a closing system. The hauls were taken in 7 vertical layers. In the area investigated 72 species of tintinnines were observed. Six dominating species contributed from 30 to 93%, an average of 63% of the total numerical abundance of tintinnines. Based on the occurrence of the majority of the population of individual species going from the surface towards the sea bottom, the tintinnines have been divided into 5 groups. Most of the species (42), presenting more than 90% of the population, were found in the layer between the surface and a depth of 100 m. Other species were found in deeper layers (rarely or almost never at the surface).     

Post-war levels of persistent organic pollutants (POPs) in air from Serbia determined by active and passive sampling methods

For the duration of the war accident in former Yugoslavia, several industrial and military targets were burnt and damaged, resulting in a significant release of persistent organic pollutants. Locations heavily targeted in the attacks were later defined by UNEP as four “hot spots”: Kragujevac, Novi Sad, Pancevo and Bor. We analyzed concentration levels of pollutants collected in 2004 and 2005 in air samples from the city of Kragujevac, Serbia, following the war accident of 1999. Pollutants included polycyclic aromatic hydrocarbons (PAHs), hexachlorocyclohexane (HCH), dichloro-diphenyl-trichloroethane (DDT), dichloro-diphenyl-dichloroethylene (DDE), dichloro-diphenyl-dichloroethane (DDD) and polychlorinated biphenyls (PCBs). We present results obtained during air sampling campaign conducted in July 2004 by the active sampling method; and during September 2004–June 2005 by the passive sampling method. Our findings show the occurrence of residual quantities of DDT, HCH, PCBs and PAHs in air samples. High levels of PCBs are probably due to the destruction of transformers during the war accident.     

Multicriteria ranking of workplaces regarding working conditions in a mining company

Ranking of workplaces with respect to working conditions is very significant for each company. It indicates the positions where employees are most exposed to adverse effects resulting from the working environment, which endangers their health. This article presents the results obtained for 12 different production workplaces in the copper mining and smelting complex RTB Bor – ‘Veliki Krivelj’ open pit, based on six parameters measured regularly which defined the following working environment conditions: air temperature, light, noise, dustiness, chemical hazards and vibrations. The ranking of workplaces has been performed by PROMETHEE/GAIA. Additional optimization of workplaces is done by PROMETHEE V with the given limits related to maximum permitted values for working environment parameters. The obtained results indicate that the most difficult workplace is on the excavation location (excavator operator). This method can be successfully used for solving similar kinds of problems, in order to improve working conditions.     

The analysis of influence of individual and environmental factors on 2-wheeled users’ injuries

Objective: Powered 2-wheeled motor vehicles (PTWs) are one of the most vulnerable categories of road users. Bearing that fact in mind, we have researched the effects of individual and environmental factors on the severity and type of injuries of PTW users. The aim was to recognize the circumstances that cause these accidents and take some preventive actions that would improve the level of road safety for PTWs.

Methods: In the period from 2001 to 2010, an analysis of 139 road accidents involving PTWs was made by the Faculty of Transport and Traffic Engineering in Belgrade. The effects of both individual (age, gender, etc.) and environmental factors (place of an accident, time of day, etc.) on the cause of accidents and severity and type of injuries of PTWs are reported in this article. Analyses of these effects were conducted using logistic regression, chi-square tests, and Pearson's correlation.

Results: Factors such as categories of road users, pavement conditions, place of accident, age, and time of day have a statistically significant effect on PTW injuries, whereas other factors (gender, road type; that is, straight or curvy) do not. The article also defines the interdependence of the occurrence of particular injuries at certain speeds. The results show that if PTW users died of a head injury, these were usually concurrent with chest injuries, injuries to internal organs, and limb injuries.

Conclusions: It has been shown that there is a high degree of influence of individual factors on the occurrence of accidents involving 2-wheelers (PTWs/bicycles) but with no statistically significant relation. Establishing the existence of such conditionalities enables identifying and defining factors that have an impact on the occurrence of traffic accidents involving bicyclists or PTWs. Such a link between individual factors and the occurrence of accidents makes it possible for system managers to take appropriate actions aimed at certain categories of 2-wheelers in order to reduce casualties in a particular area. The analysis showed that most of the road factors do not have a statistically significant effect on either category of 2-wheeler. Namely, the logistic regression analysis showed that there is a statistically significant effect of the place of accident on the occurrence of accidents involving bicyclists.     

The influence of alcohol on pedestrians: A different approach to the effectiveness of the new traffic safety law

Objective: The aim of this study was to explore the effects of the new traffic safety law on pedestrian mortality by exploring hazardous behaviors of pedestrians in terms of alcohol use and blood alcohol concentration (BAC).

Methods: A retrospective autopsy study was performed, covering a 7-year period (from 2006 to 2012), including cases of fatally injured pedestrians who died at the scene of the incident. Blood samples obtained from the femoral vein during autopsy were analyzed for BAC. The entire sample was divided into 2 groups. The first included cases from 2006 to 2009, at which time the old traffic safety law was in force, and the second included cases from 2010 to 2012, under the new traffic safety law.

Results: A total of 247 cases were examined, covering a 7-year period. The average age was 57.5 ± 19.7 years (median 61.0 years) with a significant male predominance of 147 men to 100 women. This predominance also applied to alcohol use (54 vs. 13). The results show a significant decrease in the total annual number of fatally injured pedestrians, starting from 2009, compared to previous years, reaching a low in 2010, one year after implementation of the new traffic safety law. In contrast, the proportion of alcohol-intoxicated pedestrians showed no significant difference in the years preceding and following the new traffic safety law, nor did the annual distribution of BAC or mean BAC before and after application of the new law.

Conclusion: The present study indicates that the new traffic safety law has been quite effective in reducing pedestrian mortality. However, alcohol consumption and intoxication in pedestrians remains a fairly important factor in motor vehicle accidents involving pedestrians, because the proportion of pedestrians positive for alcohol, the proportion of severely intoxicated pedestrians with BAC > 1 g/L, and annual mean BAC have remained unchanged.     

Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.     

Controlling factors of phytoplankton seasonal succession in oligotrophic Mali Ston Bay (south-eastern Adriatic)

Fine spatial and temporal phytoplankton variability in Mali Ston Bay has been observed for the first time based on physicochemical properties and small herbivorous zooplankton. Extensive year-through research was conducted during 2002 at Usko station which is traditionally an area of intensive shellfish farming. The Neretva River inflow, submarine springs (“vruljas”) and precipitation are additional sources of nutrients in the bay. Temperature and salinity, combined with total inorganic nitrogen (TIN) were observed to be the most important environmental factors driving the succession of phytoplankton communities. Orthophosphate was a potential limiting factor for phytoplankton development. The nanophytoplankton abundances, as well as the microphytoplankton diatoms are controlled by herbivorous zooplankton grazing (‘top-down’ control) more than other groups of microphytoplankton. Nanophytoplankton dominated phytoplankton abundance and its most intensive development was recorded in winter and spring, while increase in microphytoplankton abundance occurred in spring and autumn. Diatoms dominated microphytoplankton abundance mostly in winter and autumn, while dinoflagellates dominated in spring and summer. Considering the number of taxa and abundance, dinoflagellates were the dominant microphytoplankton group during the year and were the main component of the spring blooms. At that time, in conditions of elevated temperature (>16 °C), decreased salinity (34–36) and increased concentrations of TIN, blooms of harmful dinoflagellate Prorocentrum minimum were recorded for the first time in the bay. The results showed a significant difference in environmental conditions, as well as in the annual phytoplankton succession and community structure, as compared with studies carried out more than 20 years ago in this area.     

Development of a fast instrumental method for the analysis of pharmaceuticals in environmental and wastewaters based on ultra high performance liquid chromatography (UHPLC)-tandem mass spectrometry (MS/MS)

This work describes the development, optimization and validation of an analytical method for the simultaneous detection and identification of 74 pharmaceutically active compounds (PhACs), from various therapeutic groups, in both environmental (ground and surface water) and wastewaters (WW). The method is based on the simultaneous extraction of all target compounds by solid phase extraction (SPE), using a hydrophilic-lipophilic balanced polymer followed by ultra high performance liquid chromatography (UHPLC) tandem mass spectrometry (MS/MS). Two selected reaction monitoring (SRM) transitions have been monitored per compound in order to fulfil the EC guidelines, as well as to ensure an accurate identification of target compounds in the samples. Quantification is performed by internal standard approach, applying 24 specific isotopically labeled compounds. The main advantages of the developed method, besides the selectivity and reliability of the results, is its high throughput. All compounds are extracted in a single step and the instrumental analysis lasts 5 min (NI mode) + 8 min (PI mode), allowing fast throughput of samples. The limits of detection range from 0.01 to 50 ng L⁻¹, depending on the matrix, for most of the compounds. Finally, the method developed has been applied to the analysis of pharmaceuticals in the Ebro river basin (NE Spain).